Turning, milling, drilling, sawing applications

Depending on the application, hinged belt conveyors or scraper belt conveyors may be the right choice.
 Hinged belt conveyors are mainly used for wool or long chips as well as tufts of chips. Scraper conveyors are mainly used for small and short chips.

Selection Turning, milling, drilling, sawing applications

SRF 040.00

• Max. Lenght 10 Meter
• Max Belt width  600 mm
• Speed up to 6 m/min
• Conveying Volume at 60°Inclination: up to 1,7 m³/h approximate value
• wool or long chips, tufts of chips

Download PDF

SRF 063.00

• Max. Length 50 Meter
• Max belt width 900 mm
• Speed up to 10 m/min
• Conveying volume at 60°inclination: up to 7,5m³/h approximate value
• wool or long chips, tufts of chips

Download PDF

KRF 100

• Max. Length 70 Meter
• Max. belt width 900 mm
• Speed  up to 12 m/min
• Conveying volume at 60° inclination: up to13 m³/h, approximate value
• wool or long chips, tufts of chips

Download PDF

KRF 040

• Max. Length 10 Meter
• Max. belt width 600 mm
• Speed up to 6 m/min
• Conveying volume at 60° inclination: up to 1,7 m³/h, approximate value
• Short chips up to 50mm length

Download PDF

KRF 063

• Max. Length 50 Meter
• Max belt width 900 mm
• Speed up to 10 m/min
• Conveying volume at 60°inclination: up to 7,5m³/h approximate value
• wool or long chips, tufts of chips

Download PDF

KRF 100

• Max. Length 70 Meter
• Max. belt width 900 mm
• Speed up to 12 m/min
• Conveying volume at 60° inclination: up to 13 m³/h, approximate value
• Short chips up to 50mm length

Download PDF